S-327 - Air Curtain Burners, Destructors, Air Curtain Incinerators, by Air Burners, LLC

S-327
SPECIFICATIONS

General:
A self-contained, completely assembled above ground Air Curtain Burner (air curtain incinerator or FireBox) with a refractory lined burn-container for portable and permanent (stationary) applications. Designed for the high temperature burning of forest slash, land clearing debris, green waste, storm debris, and other waste streams in compliance with the requirements of US EPA 40CFR60.

Shipped from the factory completely assembled ready for immediate use and does not require disassembly for relocation. The firebox is also used for disaster recovery and Homeland Security contingencies and for certain MSW disposal applications. Electrically powered version available for permanent (stationary) installations.

Power Source

Four cylinder Turbo Diesel Engine 85 HP (Kubota V3600-TE or equivalent engine); full enclosure; security locks; Emission certified US EPA Tier3; Engine mounted PTO

Burn Container
(Firebox)

4" (102 mm) thick refractory panels filled with proprietary thermal ceramic material; Two full height rear doors; Two ignition holes

Safety Systems

Engine over temperature shut down; Loss of cooling fluid shutdown; Loss of oil pressure shutdown

Instrument Panel

Key switch, tachometer, hour meter, fuel gauge, oil pressure and water temperature indicators with safety shutdown feature and throttle; Lockable instrument panel

Air Supply

Custom heavy duty industrial fan

Fuel Tank

65 gallon (265 L) minimum fuel tank capacity

Transportation
& Set-up

Shipped completely assembled; Ready for immediate use; Lifting pads provided for crane lifting

Options

Ash clean-out rake; Front deck security enclosure; Ember screen; Electric motor; Heat recovery; Rough-terrain removable dolly; Electric power generation (PG FireBox Series)

Average Through-put

12 Tons per Hour (Average – See Note)

Fuel Consumption

Approx. 3.5 Gal/Hr (13.3 L/Hr)

Weight

54,600 lbs (24,800kg)

Dimensions

Overall Size
L × W × H

Fire Box
L × W × H

37' 4" × 11' 10" × 9' 7"
(11.40m × 3.6m × 2.9m)

27' 2"× 8' 5" ×8' 1"
(8.3m × 2.6m × 2.46m)

Note: Achievable through-put depends on several variables, especially the nature of the waste material, the burn chamber temperature and the loading rate. All weights and dimensions are approximate and metric conversions are rounded. Subject to change without notice.

Rev. 10.201G