|
General:
A self contained, completely assembled above ground Air Curtain Incinerator (air curtain burner) with a refractory lined firebox for permanent (stationary) installations or for applications requiring a portable unit. Designed for the high temperature burning of forest slash, land clearing debris, green waste, storm debris and other untreated wood waste with performance exceeding the requirements of US EPA 40CFR60.
Shipped from the factory completely assembled ready for immediate use and does not require disassembly for relocation. These fireboxes are also used for disaster recovery and Homeland Security contingencies and for certain MSW disposal applications. Electrically powered version available for permanent (stationary) installations. |
|
|
1 |
Power Source |
Perkins Model 403
Diesel Engine (or equivalent) engine, full enclosure; security locks around
power source; emission certified US EPA Tier3 |
|
2 |
Drive Train |
Direct
drive, engine mounted fan. |
|
3 |
Burn Container
(Firebox) |
4"
(102 mm) thick walls; Refractory panels filled with proprietary thermal
ceramic material cast into steel trays; panels kiln cured before assembly with
proprietary stress relieving and crack propagation reduction features; 2
full height rear doors with 2 hinges each and safety latch feature; 1
ignition hole with safety hatch |
|
4 |
Safety Systems |
Over
temperature shut down: Loss of cooling fluid shutdown. |
|
5 |
Electrical System |
12 V DC with engine
mounted alternator |
|
6 |
Instrument Panel |
Start/Stop switch,
tachometer, hour meter, oil pressure and water temperature indicators with
safety shutdown feature and adjustable locking throttle; lockable
instrument panel |
|
7 |
Fan |
Custom fan |
|
8 |
Manifold |
Welded 10 gauge steel
assembly |
|
9 |
Skid Deck / Equipment
Deck |
½" (12.7 mm) steel
plate, all solid-weld construction equipment deck with protective brush and
ember guard; proprietary “cool wall” ventilated firewall for operator and
equipment protection; diamond plate anti-slip top surface. Full engine
enclosure to protect against debris build-up which may become a fire hazard
and to provide operator safety from rotating parts. Fully enclosed bottom
surface to minimize ground pressure |
|
10 |
Miscellaneous |
30 gallon (113 liters)
minimum fuel tank capacity |
|
11 |
Air Quality |
Meets or exceeds
applicable US-EPA regulations |
|
12 |
Transportation
& Set-up
|
Shipped
completely assembled - No on-site set-up; Ready for immediate use;
Transportable by "tilt-bed trailer", "sliding-axle
trailer", standard flatbed or other such trailer systems; Unit is skid
mounted and it has no floor; 2 doors in back; Lifting pads provided for
crane lifting
|
|
13 |
Options
|
Ember
screen; For permanent installations: Electric motor; Heat recovery
|
|
14 |
Average
Through-put
|
0.5-2
Tons per Hour
|
|
15 |
Fuel
Consumption
|
Approx. 1.5 Gal/Hr.
(5.7 L/Hr.) |
|
16 |
Weight
|
22,500 lbs (10,200kg) |
|
17 |
Dimensions |
Overall Size
L × W × H |
Fire Box
L × W × H |
|
16' × 7'
5" × 7' 8"
(5m × 2.2m × 2.3m) |
11' × 5' × 6'
(3.35m × 1.5m × 1.8m) |
|
Note: All
weights and dimensions are approximate and metric conversions are
rounded.
Subject to change without notice. |
Rev. 0909 |
|